Our rings are Cut in house, they are cleaned, tumbled, polished, dried and then packaged with love for you to create with! Copper is stunning and easy to work with!

Half Round Wire is quite different to work with than the fully round wire we usually make jump rings with.  The main difference is that the wire is flatter than round, so Aspect Ratio doesn't work the same.  Also the GAUGE that they sell Half round wire in, does NOT compare with the round wire gauges we use. 

Some consideration when BUYING these rings - You MUST be Gentle with your pliers.  You are gripping the finest outside edge of the wire - so squeezing too tight with you pliers will damage the rings. Coiling these rings is a bigger challenge for us, we do our best to make them perfect, but will include some extras in case they aren't all perfect.  

We highly recommend the Xuron pliers for these rings!

Details

• Half Round wire is roughly 1.6mm wide x .80 mm tall in the middle -- rings are roughly 4mm ID.  This wire doesn't translate into wire GAUGE like round.
• AR= DOESN'T APPY AS THE SHAPE OF THE WIRE DOESN'T WORK LIKE ROUND WIRE
• This size is perfect for a single spiral pattern.  It doesn't un-spiral like regular spiral, nor does it lock like JPL, but it does hold it shape in the spiral in the pattern, so it's more similar to JPL, than regular spiral.
• Due to the rounded edges, you MUST be gentle with your pliers... We strongly recommend Xurons for these rings.
• I would say the spiral chain this makes is most comparable to an 18 SWG wire in round, just to give you an idea of bulkiness.
• The rings do tangle when they are tumbled, so you might have to untangle a few depending on the batch!
• 15 rings per inch for spiral!!!

Bulk Discount

Please use drop down menu on right hand side to select larger bags of rings. There is a price break for buying larger amounts.