null Skip to main content

Titanium Jump Rings 24 Gauge 1/16" id.

$45.00
(2 reviews) Write a Review
SKU:
Ti24116
Weight:
0.04 LBS
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

Half ounce of Snip Cut 24 gauge 1/16" inner diameter Titanium Jump Rings.

Titanium is an amazing metal.  It is light weight, Super strong, and Hypoallergenic.  It is a reactive metal, and colours with heat or electricity.  This is not a paint or a dye - but the outside layer oxidization of the metal when we electrocute it! It is hypoallergenic, so people with metal allergies can wear this metal.  This metal is the ONLY metal we hand cut, rather than saw cut.  Saw Cut titanium is VERY hard to work with.  The spring back causes the metal to relax after it's been closed... causing your perfect closures to reopen... we find that if the rings are hand cut with flush cutters, the closure isn't as perfect as saw cut, but it stays closed!!  We DO NOT RECOMMEND titanium as a beginner material.  It is VERY hard to manipulate and bend and is not a beginner friendly material choice!  Titanium will actually spark on occasion when you push the two ends of a ring together!

Our rings are Cut in house, they are cleaned, tumbled, polished, dried and then packaged with love for you to create with! We LOVE our easier to work with stainless Steel... You will too!!

Details

  • 24 gauge 1/16" ID
  • AR=3.5
  • 1.8 mm ID
  • Approximately 2250 jump rings per half ounce.
  • This size is great for European 4-1 and Stunningly dainty Byzantine!

 

2 Reviews Hide Reviews Show Reviews

  • 5
    Tiny Titanium Rings

    Posted by Joseph Moreno on 26th Nov 2020

    These are beautiful. Cut well and so small!

  • 5
    24 g 1/16 titanium rings

    Posted by jane on 26th Dec 2019

    I was a little hesitant if tackling these but the were a joy to work with. Thanks for the quick response to my questions.