null Skip to main content

Stainless Steel Jump Rings 20 Gauge 3/16" id.

$4.00 - $34.97
(No reviews yet) Write a Review
SKU:
SS20316
Weight:
0.02 LBS
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

Saw cut 20 gauge 3/16" inner diameter Stainless Steel jump rings.

AR=6.3

All of our Stainless Steel is made from CANADIAN 304 Stainless Steel that is annealed, so it is softer and easier to bend than the 1/4 hard that most other companies make and sell.  We also order our wire with a bright finish, so it is clean, deburred and shiny for you to weave with right from the package!  Our Round and Square wire is the same and the sizing is the same - so our square rings work the same as the round - You don't have to figure a different size for our rings if they are square!  The twisted rings are made from square wire, which is twisted, then coiled, then cut, so is work hardened a little more than the others.  It is still MUCH easier to bend and manipulate than standard Stainless steel sold by other chainmail suppliers out there. 

Our rings are Cut in house, they are cleaned, tumbled, polished, dried and then packaged with love for you to create with! We LOVE our easier to work with stainless Steel... You will too!!

Details

  • 20 guage 3/16" ID
  • AR=6.3
  • This size is great for European 4-1 (4850 rings per Sq Foot), European 6-1, European 8-1, Acute Helm (with 20g 7/64"), Dragon Scale (with 20g 1/8"), Helm's Weave (with 20g 3/32"), Zig Zag (with 20g 1/8")

Bulk Discount

Please use drop down menu on right hand side to select larger bags of rings. There is a price break for buying larger amounts.

 
The current batch of this size ring is a tricky size to cut.  Some of the rings tangled during the tumbling and deburring process. There are a higher number of bad rings in this batch, so we send extras to make up for having to untangle and make up for the unusable rings.  If this was simply a batch issue, we would have thrown them out and replaced... but this SIZE causes us issues each time it is cut.  We are working on a new saw set up solution to fix it!  Thanks for your understanding!