The EZ Earring is an easy to use tool to make all your own earring wires!

You can make 3 different types of ear wires, no shank, shank, and long shank. Beads and coils can easily be added to the shank and long shank styles. It is designed for use with 20 gauge wire. Works well with Copper, Colored Copper, Sterling Silver and Gold (half hard or softer), and Niobium.

ONLY $22.00 CND for this awesome tool!!

Cut a length of 20 gauge wire the same length as the tool, approx. 2". Lay the wire down so that it matches up to with the mark, see small pic, give the wire a little bend with your finger.

Using the Eye Winder, slip it over the eye dowel and twist. Make perfect eyes every time.

Press the lever shown to make the shank.

Wrap the wire around, if you cut the wire the length of the tool, you won't have excess, it will match up to the end when you press the second lever. Wire shown longer so it is easier to see.

Press the second lever and you are finished. Add some coils and/or beads and you have a unique and customized ear wire.

Also included in the instructions are how to make the no shank ear wires.

Wire for Making Your own Ear Wires!

All Wire is 20 and available in 5 or 10 foot lengths

Wire Type	Length of Wire	$	# of earwires you can make	$ per pair
Niobium	5 feet	$7.50	15 Pairs	$0.50
Niobium	10 feet	$14.00	30 Pairs	$0.47
Enameled Copper	5 feet	$3.00	15 Pairs	$0.20
Enameled Copper	10 feet	$5.50	30 Pairs	$0.18
Sterling Silver	5 feet	$12.00	15 Pairs	$0.80
Sterling Silver	10 feet	$20.00	30 Pairs	$0.67