Ok! My apologies for the delay in getting this chart made, it was not an easy task! Speaking with Dylon Whyte, it was his job to take all these patterns and put them into the book using the same sizes. With the whole confusion with AWG vs SWG it was a big job for him!
| Project Name | Ring Sizes that are closest to the piece shown in the book | Other Ring sizes that should work |
| Titanium Duet (Euro 4-1) | 16g 1/4" | Any size of rubber ring will work. We carry 16g 1/4", 20g 7/64", and 14g 3/16". |
| Hana-Gusari Anklet | 18g 3/16(A) 18g 5/32" (B) | Any ring size will work for this weave... Bigger-- smaller, your choice! |
| Japanese Cascade Earrings with Pearls | 20g 5/32"(A) 22G 3/32" (B) | We suggest using all 20g for strength rather than trying to solder the small rings. You could also up the large rings to 18g and the use 20g for the small. Japanese weaves are very flexible. |
| Double Triangle Earrings | 18g 5/16" (A) 22g 3/32" (B) | We suggest using 20g 1/8" or 7/64" instead of 22g... just for strength! |
| Gold & Amethyst Parure | 20g 5/32" | 20g 1/8" would also work great for this project |
| King's Mail Bracelet | 18g 5/16" (A) 18g 1/4" (B) 18g 5/32" (C) | We also suggest 18g 1/4", 20g 3/16" for the main weave. |
| Golden Lariat | 20g 5/32" | You can do smaller in 20g 1/8" if strength of weave concerns you. |
| Mobiused Rosettes Bracelet | 18g 1/4"(A) 18g 5/32" (B) | 18g in our rings seems a little bulky. We suggest 20g 5/32" for mobius flowers. |
| Natasha Necklace | 20g 1/8" (A) 18g 3/16" (B) 18g 5/16"(C) | These sizes look good to us |
| Inlaid Chain Mail Pendant | 16g 3/16" | This might be too tight in our gauge. I would suggest using 18g 5/32" The strength would be fine and you have MANY colour options with our enameled copper selection |
| Spiraling Chain | 16g 7/16" | This is a VERY bulky chain. You can make smaller using 18g 3/16" or 20g 1/8" |
| Red & Black Cuff | 18g 3/16" (A) 18g 1/4" (B) 16g 7/16" (C) 16g 5/16" Rubber | This Japanese weave can be adjusted to a daintier size using smaller rubber rings. |
| Byzantine Parure | 18g 5/32" | We do this weave using 20g 7/64" ... It is a favourite. |
| Crochet Mandala | Pendant 22g 3/32"(B) & 18g 5/16"(A) & 22g 1/8"(D) & 20g 5/32"(C)
Earring - C= 22g 3/32" B= 18g 5/32" A= 18g 5/16" | These sizes should work |
| Free Form Flat Mail | Rubber -various sizes & 20g 1/8" | You can mix and match all our rubber sizes and colours - Your creativity is the only limit!! We'd use a cheaper metal than silver to connect. |
| Hana-Gusari Bangle | 16g 5/16"(A) 18g 5/32" (B) | You can experiment with other japanese patterns... Make sure your closures are better than the photo |
| Japanese 4-1 Chain Mail Bracelet | 20g 1/8" | Many sizes will work for this weave... You can use smaller rings to connect bigger too |
| Lace Mail Cocktail Collar | 18g 5/16" (A) 18g 1/4"(B) 18g 1/8"(C) | Books says 16g but that is AWG... 18g is our equivelant |
| Japanese 12-2 watch band | rubber 16g 1/4" - 20g 1/8" (A) 18g 5/16" (B) | This is a fun piece... You can flip and use small rubber and connect with big solid rings |
| Japanese 6-1 Mail Bracelet | 16g 3/8"(A) 18g 5/32 | Simple variation! Nice... |
| Japanese Lace Collar | 20g 3/32"(A) 20g 9/64" (B) 20g 5/32"(C) 20g 3/16" (D) | These sizes are calculated... We don't use 19 or 21 guage, so we did our best to calculate 20g equivelant |
| Braided Bracelet | 20g 1/8" | Very interesting way to spice up 4-1 |
| Chandelier Earrings | 22g 1/8" (A) 20g 3/16"(B) | Not sure where you would find the silver disks... |
| Coif Cage Amulets | 20g 3/16" (A) 20g 5/32" (B) | Many sizes will work... Euro 4-1 is flexible |
| Diamond Chain Mail Earrings | 22g 3/32" | Many sizes will work... Euro 4-1 is flexible |
| Double Strand Japanese Cube Necklace | 18g 9/64"(A) 20g 5/32" (B) |
|
| Rain Earrings | 22g 3/32" (A) 20g 1/8" (B) |
|
| Japanese Hexagonal Collar | 20g 5/32" |
|
| Tasseled Snake Lariat | 18g 3/16" (A) 20g 3/32 (B) 16g 7/16" (C) |
|
